Saturday, December 10, 2011

How to Refinish Furniture To Save Money


!±8± How to Refinish Furniture To Save Money

Buying brand new furniture is not only expensive, but you're also less likely to get a quality item that's built to last. Whether you're refurbishing an heirloom chock full of sentimental value, sprucing up a flea market find or simply repairing an old piece of furniture, refinishing furniture is a great way to keep money in your pocket and reduce waste. Keep reading for 7 great tips and steps that will teach you how to refinish furniture to save money.

1. Make Sure the Furniture is Structurally Sound.

Remember, no matter how times you sand and refinish a poorly-built piece of furniture, it's still going to be poorly built. Before you refinish any item, make sure it's structurally sound.

Make any structural repairs like re-gluing the wood joints or tightening any loose screws before you start the refinishing process.

2. Remove the Old Finish.

Probably the messiest and most difficult part of refinishing furniture is removing the old finish. The easiest way to remove old varnish and paint is by using chemical strippers and sanding. When using a chemical stripper, always do it outside to minimize the inhalation of fumes and wear protective safety gear. Also, you'll need to follow up any chemical stripping with a final sanding. First, go over the piece with 120 grit sandpaper and finally a fine 220 grit sandpaper.

3. Fill in the Grain.

Some woods don't require you to fill in the grain, but woods like mahogany and oak have a wider grain structure that should be filled in before refinishing furniture.

You can get grain filler in most wood shades and colors, and it can be applied before or after you stain.

4. Apply Sanding Sealant.

Sanding sealer goes on the wood not after you sand, but before you sand. While it's not a requirement, it can make the wood absorb the stain in a more even pattern and therefore prevent over staining.

5. Stain the Wood.

If you're refinishing a wood piece, you're most likely going to be using stain to refinish your furniture. There are four different stains you can use: oil-based stains, water-based stains, gel stains and one-step stain finishes.

When applying a stain, always follow the manufacturers' instructions.

6. Varnish the Wood.

Seal in all your hard work and keep your wood safe by applying a few coats of polyurethane or lacquer finish.

7. Put on New Hardware.

Finally, put the finishing touches on your furniture piece by updating it with new drawer pulls or hardware fixtures to give it a fresh and new look.


How to Refinish Furniture To Save Money

Comparison Dunlop Mx51 Sheetfed Scanner Discount




No comments:

Post a Comment


Twitter Facebook Flickr RSS



Fran�ais Deutsch Italiano Portugu�s
Espa�ol ??? ??? ?????







Sponsor Links